| |
|
 |
 |
 |
Home >
Products > Micron Powders >
Polycrystalline Micro Diamond Powder |
|
 |
Polycrystalline Micro Diamond Powder
(Super Syndia) |
|
|
|
|
|
|
|
Polycrystalline SS
0.5-1 |
Polycrystalline SS 0.1-0.2 |
|
SuperSyndia
is an
explosion-synthesized
micron diamond
powder. Due to its
polycrystalline
structure, it has no
well defined
cleavage planes. It
can therefore bear
pressures 2 to 3
times higher than
monocrystalline
diamond. In
addition, its
particles have a
specific surface 2
to 3 times higher
than monocrystalline
diamond, which gives
them a higher
abrasive power, due
to their many
contact points and
cutting edges.
SuperSyndia
is available in
three grading
qualities: SSX
(Precision), SS
(Standard) and SSO
(Wide), each being
graded to specific
limits for its
targeted application
range. The excellent
grading quality is
an important
feature, all the
more due to the
toughness of its
particles.
SuperSyndia
micron diamond
powder best shows
its advantages in
loose abrasive
lapping and
polishing
applications:
Lapping and
polishing of
monocrystalline
ceramics (sapphire,
ruby) or sintered
ceramics (zirconium,
aluminium oxide, SiC)
can be performed at
a higher working
pressure, therefore
at a higher
production rate
without any loss in
surface finish. |
|
 |
Through its
high cutting
power,
SuperSyndia
diamond is
unchallenged
in the
lapping and
polishing of
composite
materials,
on which it
produces
very flat
surfaces,
without any
unevenness
between hard
and soft
areas.
This SEM
picture
shows a
special,
very fine SS
0.1-0.2
micron
powder, in
approx.
30'000x
magnification.
It
demonstrates
our
precision
grading
capabilities.
We can
satisfy any
technical
requirement,
from the
finest to
the coarsest
micron
powder
sizes,
accurately
and
consistently. |
|
Polycrystalline
diamond
powder
|
|
 |
|
In this section
Monocrystal
Micron Diamond
Powder
RB Mesh & Micron
CBN Mesh & Micro
MB Mesh Size
|
|
|
|
|
|
