AWIN DIAMOND TECHNOLOGY CORPORATION

Home > Products > Heat Spreaders > Composite Diamond Heat Spreaders

	Composite Diamond Heat Spreaders



Composite Diamond Heat Spreaders for Thermal management solutions		Composite Diamond Heat Spreaders have a thermal conductivity of 600 W/mK and an average CTE(coefficient of thermal expansion) of 3.0 in the range of 20-300°C. Therefore, Composite Diamond as a heat spreader material is intermediate between CVD diamond (Diafilm TM) and other heat spreading materials, such as AlN and Cu. Composite Diamond Heat Spreader material is produced by high temperature, high pressure sintering of small diamond particles to form a homogenous integrown diamond lattice structure. The fine grain structure and uniform distribution of the binder makes this material ideal for heat spreader applications. It can be used for
devices with small heat sources, such as laser diodes (Lds), laser diode arrays (LDAs) and high power light emitting diodes (LEDs). The surface of Composite Diamond Heat Spreaders can be polished to a high degree of surface quality and flatness. Based on well controlled, high precision laser cutting, excellent edge qualities can be achieved, which is required for edge emitting laser diodes and laser diode arrays. Thermal expansion of Composite Diamond Heat Spreaders versus temperature.
Advantages High CTE (3.0ppm/K) to enable low stress mounting of large InP and GaAs chips. Excellent surface roughness and edge quality. High flatness specification available (down to 1μm/10mm). Large areas available. Good performance/price ratio. Broad range of metallisations available. General Material available with high quality thin film coatings Metallisation recommended: Ti/Pt/Au/Pt/Au (100/120/3000/120/200nm) for Indium soft solder applications or Ti/Pt/Au (100/120/300nm) all sides plus Ti/TiN/Ti/AuSn/Au (40/120/40/3000/50nm) on top face for hard soldering. Technical support for the use of solder materials and solder processes. Cleanroom class 100 compatible manufacturing and packing. Generic drawings available for technical detail. Sample products on stock for customer evaluation.
In this section CVD Diamond Heat Spreaders AlN Heat Spreaders Thermal Material Properties ADC